Original
The company profile was verified by 
◆After be heated, clean air enters into dry tower; Inside tower hot-air, to use two-fluid (or third-fluid) nozzle to materilize any kinds of feed solution into minute drop and then to do the rapid heat exchange with hot-air to evaporate its water(solution) and discharge it with wind, finally to get the powder products.
Features:
1. Special for large viscosity, paste material, it is more effective than any other equipments.
2. Experiment type, multi-varitey,wide application under low-temperature.
3. Simple nozzle structure,easy of maintance, less operation cost.
Technical Parameters
|
type parameters |
5 |
25 |
50 |
100 |
150 |
200 |
|
|
Amount of evaporation Kg/h |
△t=150℃~90℃ |
1.5 |
7.5 |
15 |
30 |
45 |
60 |
|
△t=200℃~100℃ |
2.5 |
12.5 |
25 |
50 |
75 |
100 |
|
|
△t=250℃~90℃ |
3.75 |
18.75 |
37.5 |
75 |
112.5 |
150 |
|
|
△t=300℃~100℃ |
5 |
25 |
50 |
100 |
150 |
200 |
|
|
△t=350℃~110℃ |
6 |
30 |
60 |
120 |
200 |
240 |
|
|
Compressed air(m3/min) |
0.9 |
0.9 |
1.1 |
1.5 |
2.7 |
3.4 |
|
|
Presure of air (Mpa) |
0.4 |
0.6 |
0.7 |
||||
|
Heat resource |
Electricity, electricity + steam coal (oil) hot stove |
||||||
|
Comsunption of heating 104 Kcal/hKcal/h |
1 |
5 |
10 |
20 |
30 |
40 |
|
|
Powerkw |
0.75 |
2.2 |
4 |
7.5 |
11 |
15 |
|
Note: 1, this equipment is more than 200 type can be designed and manufactured according to the actual need to: 2, fan power as the standard process, such as bag dust removal and recycling the solvent will be increased.
