| RSS
Business center
Office
Post trade leads
Post
Rank promotion
Ranking
 
You are at: Home » News » internal »

Designing hierarchical nanoporous membranes for highly efficient adsorption and storage applications

Increase font size  Decrease font size Date:2020-10-16   Views:223

In the field of volatile organic compounds, graphene oxides have attracted attention as two-dimensional (2-D) materials with nanoporous membranes due to their molecular-sieve-like architectural properties and functional simplicity suited for hydrogen (H2) adsorption. Nevertheless, the accumulation of graphene sheets can be challenging due to their low efficiency for long-term industrial applications. As a result, Haiyan Mao and a research team at the University of California Berkeley, Stanford University and the Lawrence Berkeley National Lab in the U.S. designed hierarchical nanoporous membranes (HNMs). They designed and developed the constructs by combining a class of nanocomposites with a carbon sphere and graphene oxide. The team followed Murray's law (an optimization principle) to prepare the hierarchical carbon spheres to act as spacers and adsorbents, using chemical activation alongside microwave heating. The HNMs contained micropores dominated by a combination of ultra-micropores and mesopores. The work can be expanded across environmental and energy fields.


Materials architecture for industrial gas separation and storage.

Designing materials for gas separation and storage can be challenging due to conflicting goals. For example, pores on the order of molecular dimensions are necessary to discriminate various gases on the basis of size, but they must also be chemically functionalized to facilitate chemical selectivity during adsorption. Capillary effects can also cause clogging in narrow pores due to impurities and gas condensation. Mao et al. therefore created hierarchical materials that combined elegant 2-D nanosheets with synthetic carbon spheres to create a "meatball sandwich" in an easily scaled production process. The materials successfully performed volatile organic adsorption and hydrogen gas storage. Industrial gas separation and storage have a long history where porous materials including activated carbon, zoolites and metal organic frameworks (MOFs) have facilitated the removal of volatile organic compounds and stored hydrogen, although their limited mechanical stability can restrict long-term applications. While some MOFs have shown high gas adsorption performance, their large-area production is associated with increased fragility.

Engineering carbon spheres

Scientists had therefore recently developed carbon spheres with hierarchical micro- and mesospheres for applications in the presence of volatile organic compounds (VOCs) and hydrogen (H2) adsorption due to their high sphericity, selectivity, and porosity. Mao et al. transformed these spheres into membranes using binders, but the constructs were susceptible to expensive manufacturing costs and mechanical instabilities. The team therefore assembled hierarchical nanoporous membrane (HNM) structures by assembling carbon spheres as effective nanoporous spacers to improve cross-plane mass transfer through expanded interlayer spacing. The team crafted hydrothermal carbonization of pinewood-based cellulose mixed with graphene oxide (GO) to create membranes based on an extremely simple doctor-blade method. Generally, the method is widely used to produce thin films in large surface areas, and the resulting porous HNMs contained micropores and mesopores.

Mao et al. developed the hierarchical carbon spheres (HCSs) with high surface area, high sphericity and monodispersibility through several steps, which included hydrothermal carbonization synthesis and chemical-microwave activation methods. The team used scanning electron microscopy (SEM) to understand the effects of the reaction temperature, reaction time and cellulose concentration of the HCS. They noted rapid cellulose decomposition during hydrothermal temperature increase to generate hydrothermal carbons with a higher degree of aromatization. After optimal treatment, Mao et al. obtained optimized carbon spheres with spherical structure and a smooth surface without a hollow interior. Using infrared (IR) spectra, they showed how the cellulose and carbon spheres indicated the presence of many oxygen functional groups on the surface of the HCS. The cellulose underwent dehydration and aromatization during hydrothermal carbonization. Mao et al. used X-ray diffraction (XRD) analysis to understand the XRD patterns of cellulose and carbon spheres to show how the resulting carbon materials existed in an amorphous state.

The team subsequently synthesized the graphene oxide (GO)/hierarchical carbon spheres (HCS), followed by scanning electron microscopy investigations to distinctly identify the graphene nanosheets, which were in good agreement with previous work. The HCSs retained a spherical architecture without obvious damage or wrinkled textures; the method prevented the aggregation of graphene to successfully fabricate the new GO/HCS (graphene oxide/hierarchical carbon sphere) composites.

Developing hierarchical nanoporous membranes (HNMs) and proof-of-concept:

Mao et al. used the doctor-blade deposition method to produce hierarchical nanoporous membranes (HNMs) with highly versatile, uniform and free-standing membranes with precisely controlled thickness. The structures showed a higher degree of corrugation in comparison to pure graphene oxide; beneficial for volatile organic compound (VOC) diffusion and adsorption. All experimental outcomes confirmed the facile fabrication procedure, large surface area and low cost of the starting materials used to develop HNMs as promising candidates for VOC and hydrogen storage. As proof of concept, Mao et al recorded the adsorption performance of VOCs to understand the contribution of hierarchical structures and the mechanical stability of hierarchical nanopore membranes. As an example, with volatile compounds such as toluene and acetone, the adsorption capacities were comparable to other porous materials. At high concentrations, the adsorption capacity increased gradually. In this way, the extremely well-developed micropores efficiently and rapidly adsorbed the toluene/acetone molecules. The outcomes indicated promising adsorption performance in low-concentration, volatile organic compound (VOC) environments.

Mao et al additionally tested the hydrogen storage capacity of HNM due to their exceptionally high surface areas and hierarchical micropore-dominated structures. The work showed advantages for hydrogen adsorption including low cost, good reversibility and safety. The team tested the cost-effectiveness and durability of HNMs through multiple adsorption/desorption cycles to confirm the cost-effective applications of the membranes.

 
 
[ Search ]  [ ]  [ Email ]  [ Print ]  [ Close ]  [ Top ]

 
Total:0comment(s) [View All]  Related comment

 
Recomment
Popular
 
 
Home | About | Service | copyright | agreement | contact | about | SiteMap | Links | GuestBook | Ads service | 京ICP 68975478-1
Tel:+86-10-68645975           Fax:+86-10-68645973
E-mail:yaoshang68@163.com     QQ:1483838028